Category: Blog

Why is Maintaining Mini Truck Tyres Essential

Tyres are an important aspect of every vehicle despite its purpose, model and size. If your mini truck, car, or pickup tyres are well maintained, your vehicle will run more efficiently and smoothly. Therefore, as the owner or person driving the vehicle regularly, you must check the tyres and maintain their condition. If you are involved in the truck driving industry, you must know how to maintain the truck to ensure smooth running. Tyres are among the most essential parts of your trucks but can be very complex, mainly because they have many components. However, learning how to maintain your truck’s or mini truck’s tyres is not negotiable.

 

What are the Benefits of Maintaining Mini Truck Tyres

The reason why maintaining the tyres of your mini truck is essential is because of the following reasons;

 

  • It leads to improved safety while on the road

If mni truck tyres are poorly maintained, they wear out, making them bald. This affects your brakes, severely reducing the tyres’ grip on the road. When the tyres have less grip on the road,  the brakes will fail to work perfectly, which can cause accidents. Secondly, if you do not maintain the condition of your mini truck tyres, they may be over-inflated or under-inflated without you knowing. This may cause the tyres to blow out at any time, catching you off guard and may cause your mini truck to crash. All these can be avoided by ensuring that you maintain the condition of the mini truck tyres.

 

  • It enhances comfort

While most people do not think maintaining the mini truck tyre can cause more comfort, it does. Well, maintained tyres produce less noise and vibrations while on the road. Therefore, this ensures that the driver has a perfect journey.

 

  • It prevents driver fatigue

Driver fatigue is a significant cause of accidents worldwide every year. One of the reasons why driers develop fatigue is due to depleted tyres, mainly because they cannot control their vehicles promptly. Fortunately, maintaining the condition of the tyres of your mini trucks will always prevent driver fatigue, ensuring that your journey is safe.

 

  • It enhances fuel efficiency

Another benefit of maintaining your mini truck’s tyres is enhancing fuel efficiency. When the tyres of your mini truck are underinflated, they cause more resistance when rolling, leading to decreased fuel efficiency. When your tyres are well maintained, they improve your gas mileage since they are well-inflated, maintaining the proper pressure on the tyres. This helps you save money and reduce the levels of carbon footprint in the environment.

 

  • It extends the lifespan of the tyres

Maintaining the condition of your mini truck tyre also extends the tyres’ life, saving you so much money. This is because checking the condition of the tyres regularly and ensuring that they are appropriately inflated prevents them from uneven wearing. For this reason, you do not have to keep replacing the tyres prematurely.

 

  • It is cost saving

As mentioned earlier, maintaining the condition of specialised earthmoving tyres saves you so much money. To begin with, it ensures that your tire pressure is correct and the tyres are well inflated, improving fuel efficiency, which saves you the money you spend on gas. Also, maintaining the tyres’ condition prevents you from replacing them prematurely, which saves you money too. In addition, making sure that you are driving a minitruck with well-maintained tyres prevents you from expensive repairs and medical bills that result from accidents caused by faulty accidents. This also prevents you from spending your money unnecessarily.

 

 

Maintaining the condition of your mini truck tyres is very important due to the above reasons. Therefore, regularly inspect the condition of your tyres,  check the tyre pressure and always get quality mini truck tyres. Also, consider getting a professional to service your mini truck tyres regularly.

 

Read More »

Tips for repairing concrete

Are you worried about your broken down porch or want some tips for repairing the steps, the following are a few things which beginners must keep in mind to make the project much easier.

When it comes to repairing concrete there are tools which can help make things much easier. However it is important that you have all the supplies which are required in order to repair the concrete steps or any other concrete structure.

You would need a concrete bonding adhesive along with quick setting cement and a set of protective clothes along with a flat hammer and hammer drill. The hammer drills will help you drill through the Concrete; also if you have to buy a new one then you may want to get SDS drill. These are pretty much efficient and can help speed up the project.

The first thing that you need to do is to prepare the broken concrete in order to be repaired. You must inspect the concrete for other cracks and imperfections as well. First you need to remove the paint or any debris which might interfere with the bonding of the new material. Then you need to apply the adhesive to the concrete and make sure that you follow through this step otherwise the concrete patch would end up broken again.

Make use of the hammer drills to drill through the concrete, however if possible make sure that you invest in a diamond drill and even though these are expensive they are pretty fast and can drive through even the hardest of concrete. You should start by drilling several holes into the concrete where you want to repair the patch then you should place the tap on to serve as anchors for the new cement. Clean the area again to get rid of dust from the concrete bonding adhesive and then quickly mix up quick setting cement. This can help speed up the project because it hardens in less than 20 minutes and also allows the cement to become solid in a single day only. You may need to make the slurry with one part water to five parts of cement and you would need a small bucket to make that happen. Keep in mind that you should only mix a certain amount of cement which can be used within 10 minutes only. Once you have laid down the cement you may need to use sponge to shape it into place.

Once the job is completed you have to make sure that nothing stands on the concrete patch for at least the first 24 to 48 hours. However if you have not done any drilling in the past or do not have the right kind of equipment to do the job then it is better that you call a professional to handle it for you. They are concrete cutting specialists who know all about the job. Concrete drilling is something which should only be done if you have enough experience in handling a concrete drill.

Read More »

Is Washtech M2 passthrough dishwasher worth the money?

Dishwashers have been a boon to a lot of people, it took care of one of the biggest time and effort takers for the ones cooking. While traditional washing methods were okay at cleaning your utensils, it would wreck the people who were dishwashing with the effort it took. Dishwashers nowadays are completely able to remove dirt from utensils, also at the same time saving the time and effort of the people cooking. There are certain things to look at before buying a dishwasher, such as its cleaning capabilities, drying capability, reliability, maintenance, if it has smart features or not, etcetera. Now that we know what to look at first let us take a deeper dive into it and also know if the Washtech M2 passthrough dishwasher is worth it or not.

 

The features

The Washtech M2 is packed with features.

  • It can start the cleaning automatically as soon as you close the hood.
  • It offers a whopping 1,080 plates / 1,500 glasses per hour capacity.
  • Soft start wash cycle
  • Only requires around 2.4 liters of water per wash cycle.
  • It can offer you 60/80/120 seconds wash cycles.
  • It can prevent backflow in itself
  • Offers one of the best electronic control systems for dishwashers
  • Reliable double filtration system through scrap trays and separate wash inlet filter.

It’s a dishwasher with a powerful hot water wash capability for those notorious stains which do not want to leave you alone, but does it give you efficiency at the same time?

In terms of operating costs, this will be a dishwasher which will not trouble you. The electricity it consumes is 5-10 kilo watt hours depending upon the wash cycle. The water costs are quite low as only 2.4 liters of water is used per wash cycle. If you are in a hurry, this dishwasher can be extremely handy due to its fast wash cycles.

Depending upon how much dirt is stuck on the utensils you can adjust the wash cycles to wash it longer and clean accordingly.

 

Does it meet reliability and usability too?

The Washtech M2 is a dishwasher that prides itself upon its reliability and maintenance. It has been made from heavy-duty stainless steel and it’s easy to say that it doesn’t need much care in the long run. It has been specifically engineered to sustain Australian kitchens. Easy installation supplied with water supply, detergent, and rinse aid pumps.

Here are the reliability and usability features

  • The Washtech M2 is compatible with 500mm racks.
  • Heavy-duty stainless steel construction with wash manifold.
  • It can clean itself from the grease and stains which come after the dishwashing is done.
  • Eco-power mode to reduce temperatures and energy consumption when idle so that it doesnt take up the extra energy.

Now reliability and usability features can be a lot in number but do the company trust the product enough to give out long warranties? It gives a 5-2-1 comprehensive Moffats warranty and also an eight-year warranty on the parts. Since we now know that it meets reliability and features, the only thing which decides its buying practicality is its cost.

 

Costly but…

We installed a Washtech M2 pass through dishwasher, and we have no regrets. The Washtech M2 pro costs around 6,500 to 7,000 Australian dollars. It is a costly dishwasher but at this price, it is one of the best dishwashers out there, with good reliability and richness of features.

 

Read More »

Things to look for when buying an outdoor picnic table

Outdoor picnic table provides you and your family a great way of enjoying the weather as well as socializing whenever you are free. For this reason, in case you do not have an outdoor picnic table, it is high time for you to get one and place it in your home backyard. In case it is your first time purchasing an outdoor picnic table you need to know the variety of tables that you find in the market including several types of picnic tables that are available.

 

This way you’ll be able to know that there are certain things that you need to look for in the type of picnic table you require for your outdoor spaces. Since it will be unfortunate for you to make mistakes during your purchase you need to have a list of the things that you should look for in your outdoor picnic table before paying for it.

 

What you should look for in outdoor picnic table

When you’re buying an outdoor picnic table make sure that you look for the following things:

 

  • The size and shape of the picnic table

When you are buying picnic tables you will come across picnic tables of different sizes and shapes. You must be in a position to select the right outdoor picnic table for your outdoor spaces. To ensure that you select the right picnic table you need to consider the amount of space that is available in your outdoor spaces since it determines the size and the shape of the picnic table you’ll be buying. This helps you select the right of the picnic table as well as have enough space for other outdoor activities.

 

 

  • Material used in making the table

Outdoor picnic tables are made using different types of material. Fortunately, the kind of material used in making the picnic table plays a great role when you’re choosing your outdoor picnic table. Yes you need a picnic table for your outdoor spaces. You might look for a table that is made using materials that can withstand the harsh weather conditions it will be exposed to. The material should also be resistant to corrosion. In case you’re not careful about the material used in making the outdoor picnic table you are selecting you may select a picnic table that corrodes easily and gets damaged when exposed to harsh weather conditions.

 

 

  • Style and design of the table

Outdoor picnic tables are also available in different styles to cater to the needs of all the buyers in the market. You must look for the outdoor picnic table style that suits your needs and preferences.

 

  • Cost

This is another thing that most people forget to look for whenever they are looking for outdoor picnic tables. You do not want to select a picnic table that is too expensive for you to afford just because you never gave a thought to this factor. Instead you need to select a table that you can pay without too much trouble. This is why you need to look at the prices of the outdoor picnic tables available.

 

A good number of homeowners are doing all they can to ensure that they make their outdoor spaces beautiful and one of the things that can help you do this is having the right furniture in the outdoor spaces. Outdoor picnic tables are among the furniture you can have in your outdoor spaces but you have to make sure that you select the right picnic tables. Choose a trusted manufacturer of outdoor picnic tables.

Read More »

Choosing the right boat services in Gold Coast

If you own a Boat it is important that you maintain it in order to continue using it for a long time. Even people who are enthusiastic about boating might be unable to care for it the right way and therefore the boat can get stashed up and forgotten. A Boat is a major investment and therefore it is necessary that you hire the right kind of boat services in Gold Coast in order to maintain it.

There are certain things that you can do on your own in order to ensure that your boat stays in mint condition. This would include changing the oil on a regular basis and cleaning the boat whenever you take it out for a ride. However, you might also need to hire a boat service so that they are able to carry out more complex tasks which require technical knowledge and are necessary to maintain the boats engine.

 

Why hire a boating service in Hervey Bay

The boat service is going to send a licence technician if you want to get your boat repaired whenever required. Spraytech Marine not only carries out the repair work but also  the basic maintenance task and an annual check to see whether it is in condition to be taken out at sea. When the weather is extreme the boats which are stored away might become deteriorated due to these conditions.

Choosing the right boating service does not have to be too difficult. If you have bought your boat from a dealership you might want to make sure that they are providing you with the warranty and repair services. They would also be providing you with a mechanic.

It would be a good idea to visit the boar services on your own first to speak to the manager. This would allow you to know what kind of people they hire as boat mechanics and what kind of expertise is possessed by the technicians. It is important that the boating mechanic you hire has the experience and qualifications to handle all kinds of boats.

The boating service will also depend upon what kind of boat you own. This is because your boat might require a special kind of service. Sometimes a boat comes with an outboard motor which might make it difficult for just about any lay person to deal with. Also if your boat has advanced electronic equipment or any sort of Technical Apparatus it is important that you hire the services of an experienced boat mechanic.

You can get to know about boat services from other boat owners. They are the ones who would be able to provide you with the right kind of recommendations. It is important that you ask owners who possess the same kind of boat as you do. Usually word of mouth is the best way to find out about a Boat service. Also if somebody knows them personally you might even be able to get yourself a discount.

Keeping these things in mind would allow you to find the right boat services in Gold Coast

Read More »

Tips for cooking on an electric barbecue

One of the biggest advantages of investing in an electric barbeque grill is that it can be used indoors as an alternative to outdoor grilling. The result is somewhat similar to that of the traditional grill but the electricity is used instead of gas or charcoal as a heat source. You can find two kinds of electric grills in the market. One which is open grill and looks like in outdoor grill comprises of a single braid for the food for stop the other is the contact grill which simply press is a food between two heated plates. Although electric grill might not give your food the same charred flavour but there are certain things that can be done to develop the desired taste. Sometimes people add wooden pallets in order to create that smoky flavour which is so common with regular barbecued food.

 

Tips for cooking on an open grill electric barbecue

You would need to setup the open grill on a flat and level surface and make sure that you get rid of all the clutter. This is because an open grill becomes very hot and could risk being a fire hazard. Make sure that you spritz the grill lightly with cooking spray if it is not non stick. You would need to preheat the grill and then make sure that you check the on and off setting and select the right temperature. If you are not too sure about the temperature you have to use you can try switching it on to 400 degrees Fahrenheit. This is the temperature used by most traditional charcoal Grills and one which can allow the simple indoor grills to automatically heat up your food.

Once the grill has become heated you might need to place your food with the help of tongs in order to avoid burning your fingers. You would only need to flip your food once after it has been cooked way. Flipping it once would allow you to get the even grill lines and prevent the lines from criss-crossing. You would require a digital thermometer in order to check the temperature of the food made on the open grill before you remove it from the heat will stop once your food is done you would need to unplug the grill and allow it to cool down completely before plating it. Once the grill has been used you would need to remove the crate and wash everything in hot water with the help of a mild soap and a sponge.

 

Cooking food on a contact grill

Please the contact grill on a clean surface and wipe down the grill plate with the help of a damp sponge. Place the dripping Pan below that edge of the lower plate. Once you have plugged in the contract will make sure that you close the plates and allow it to preheat until the light switches on. For most contact is the light is located on top of the machine and turns on and off when the grill is created. Place the food in the centre of the lower plate of the contact grill and make sure that you clamp the locks shut.

Do not open the grill and allow the food to be heated until it has been cooked all the way through. It needs to be kept in mind the time would vary according to the kind of food that you are cooking for stop force which have already been pre-cooked to not require much cooking like hot dogs and vegetables which might only take a few minutes. On the other hand chicken cut pieces of meat might take 20 minutes while beef would take longer.

Be careful when you open the contact grill because it would be very hot and always use tongs to remove the food stuff unplug the contact and then allowed to cool with the plates kept open. You would only need to wipe it down with a wet sponge and allow it to air dry.

Buy your grill from trustworthy electric bbq suppliers in Australia.

 

 

Read More »

Five Duties and Responsibilities of a Bus Electrician

Considering the huge size of a bus, it can be challenging to install electrical gadgets on it by an electrician. As such, a bus electrician needs to have sufficient knowledge of the entire bus architecture to know the best way of implementing its electrical system. It requires years of training and practical exercises to achieve such aptitudes.

A bus electrician should be conversant with the architecture of the bus that they are dealing with because every bus manufacturing company has unique design techniques. A good bus electrician should possess skills that can help him to handle the following duties.

What are the duties of a bus electrician?

  • Installing new electrical and wiring systems

The first and main responsibility of a bus electrician is to install new electrical wiring systems on the bus. To accomplish this, the electrician should have sufficient knowledge of the design of the bus that they are working on. The electrician must be able to tell the gadgets that are compatible with the bus structure right from the beginning.

  • Repainting faulty electrical and wiring system

Electrical gadgets often tend to blow out, especially when used for long durations. Hence, a bus electrician must remove such gadgets and replace them with functioning ones. Sometimes, the gadget may not be broken but just stop functioning as a result of a loose wire connection. So the electrician should be able to first diagnose the matter before he or she can decide the best solution.

  • Installing alarm systems

Installing alarm systems on a bus is a complicated yet crucial process. Considering the size of the vehicle, the electrician needs to decide appropriate points to place the alarms and also the kinds of alarm systems that are compatible with the bus. An alarm system can help to keep away criminals while at the same time alerting people of possible danger.

  • Drafting reports and paperwork

As a bus electrician, you will be required to submit a report that indicates your daily activities while in line of duty for formal purposes. Hence, you must note down every single task you handle before attending to the next client.

  • Servicing bus electrical parts

The bus electrician needs to offer maintenance services to the electrical automotive part. This ensures that every electrical gadget on the bus is running smoothly and efficiently. It also ensures sufficient energy consumption because some electrical parts tend to consume a lot of energy when they are faulty.

What you need to be considered as a bus electrician

As a bus electrician, you should possess the following aptitudes:

Proven work experience – Most automotive companies will demand a proven record of work experience before they can hire you. So make sure that you keep a record of everything you do in your work including time.

Excellent communications skills – Having proper communication skills will help you to save time in getting the client’s requirements as well as in negotiating the costs. You should at least be familiar with the local languages at the place where you work to get the better of your customers.

Great problem-solving skills – Some bus electrical failures are too complex and require a critical thinking person to handle them. Thus, a vehicle electrician needs to have complex problem-solving skills and an extensive knowledge in specialised bus electrical work if they are going to thrive in the field of bus electrical.

 

 

Read More »

Tips for finding a car mechanic

If you are looking for a place where you can take your car for maintenance and repair services you need to understand that you have to find somebody who is reliable and experienced. It is important that you carry out routine maintenance on the required time which is mentioned in the owner’s manual so that your car can remain in tip-top condition stop on the other hand we pay as our services which would need to be performed if there is a problem with your vehicle. It is important that you have an idea regarding where you are able to take your car If It breaks down or if it only needs regular maintenance work.

If it is only a scheduled maintenance that you are looking for it can be done at any dealership and you can even get it done from the place where you bought your car. You can even take your car to an independent auto repair shop of franchise however these tend to be less expensive than going to a dealership. However going to a dealership has its own sets of benefits because the mechanics at the Service Department are trained and certified to handle all aspects of your car specific model. Plus they would also have the right kind of Diagnostic equipment and any professional shop would be able to carry these task without any problem.

Repairs can range anywhere from basic tasks like getting a break job done for repairing and auto body however it also comprises of complicated services such as transmission for diagnosing electronic problems in the system of your car. However if your car is covered by the original warranty and is a relatively new you can go to a dealership and get the manufacturer to pay for fixing it. You can also go to the dealership if your card has been recorded or in which the automaker offers to make a correction for the defect. Most people also have an extended warranty which covers repairs

 

Going for car repairs in Strathpine

It has been found that customers usually prefer going to Independent shops instead of car dealerships for any repairs. However it is quite important that you find a mechanic who would be able to handle your car and whom you can trust. For this you need to do a bit of research on your own because there is not just one shop which would make a good repair shop but the following are a few things that you should be on the Lookout for:

Find car servicing in Strathpine which would be able to handle your brand of car. There are garages which are specialised in certain makes every vehicles and they put their focus on the type of car which you have and have all the equipment and training to fix the problems. You can also find a good mechanic when you seek recommendations from friends and family and last but not the least you can also get all the information about local mechanics from the internet.

 

 

Read More »

How to select the best sound reducing panels

Communication can be a great challenge for you whenever you are working in a noisy area like in a factory or industry where you have to operate heavy machinery. Also, your well-being is affected by the high noise level since they result in stress, especially if you are working long hours.  For this reason, you have to make sure that you make your place of work a better place where you can communicate with each other for your safety. Your well-being is also important, which is why you need to come up with ways that can help you reduce the noises being produced in your place of work. Sound reducing panels are among the many things that you can install on your work premises to help you make them better working places for everyone.

 

Sound reducing panels and their working mechanisms

These sound-reducing panels mitigate the noises and sounds within a certain place. They are installed on walls or ceilings so that they can trap and absorb the noises being produced. They are available in different types and are made from different materials, and this is why you need to be keen when selecting the sound-reducing panels to use in your workplace.

 

How to select the right sound reducing panels

Whenever you want to invest in your place of work, it’s always advisable that you take time to research what it’s good to spend your money on. This is what you need to do when you are selecting your sound-reducing panels. You have to make sure that you select those that will make your place of work a silent place to work in, even if it’s located in the middle of very noisy streets. You need to think about things so that you can be in a position to select the best sound-reducing panels. They include:

 

  • The level of sound or noise

The noise or sound level that you would like to lockout or is an important factor to consider when selecting your sound-reducing panels. This is because the panels are designed depending on the amount of noise one would like to reduce. Some are perfect for minimal and soft noises, while others are installed to reduce noises produced by heavy machinery.

 

  • Noise propagation

You may try to reduce noise that is either structure-borne or airborne, making it important for you to be keen on the sound-reducing panels you select. Considering how the noise travels from its source to the receiver will help you select the right sound-reducing panels.

 

  • Materials used

Sound reducing panels are usually made from different materials. Some of these materials are less eco-friendly, while others are great. Also, some of the sound-reducing panels have some flammable agents, which makes them inappropriate for certain areas. Think about the best materials for the places where you want to install your sound-reducing panels.

 

  • Ease of installation and maintenance

As you invest in your place of work, you must invest in something that does not give you a headache when you are installing it or even maintaining it. You should look at the ease of installation and maintenance of the sound-reducing panels you are buying. Sound reducing panels that are easy to install and maintain will save you so much time and money.

Avenue Interior Systems supply acoustic sound panelling. Give them a call today.

 

Read More »

Why should you invest in John Deere tracks

If you are looking for new tracks for your tractor you should definitely consider investing in John Deere tracks. Your tractor need to do a whole lot of work and all the work can take a toll on the tracks. Although if you purchase tracks from any other manufacturer, the equipment might not work as well but if you purchase John Deere tracks you can rest assured that it is going to last you through many seasons. John Deere tractors are reliable and sturdy and are made to stand the test of time. If you want to ensure that your tractor is in top shape you must definitely consider investing in these tracks.

The advantages of using John Deere tracks

For anyone who owns tractors, it is important to get the job done and it is not only that the job requires to finish but at least be done the right way. For example farmers need to do such a great deal with just one tractor. Whether it is ploughing or shoveling, the tractor needs to move on uneven terrain time and again. If you do not use the right quality tracks it can greatly hinder the productivity of the tractor. You might feel slowed down and the work might not be completed on time. If you want to ensure that your tractor moves along smoothly then you should invest in John Deere tracks.

All tractor parts from John Deere are innovative and can ensure high productivity and quality. It has the latest technology installed so that you can do a great deal more with the resources that you have. Whether you are aiming to get a higher yield when it comes to harvesting or reducing the irrigation cost using John Deere tracks would be able to provide you with all the productivity that you require to get the job done.

They offer best value to the customers because they believe that any equipment must provide should be useful and has a better return on investment for their clients.

Caring for your tractor trucks

Even if you have purchased the best quality tracks there are some maintenance tips that you need to keep in mind.

It is important to maintain the undercarriage. This means that if one the undercarriage parts wear out you need to replace them immediately. It is also better if you avoid too much tension in order to maintain the rubber tracks. It is important to consider the manufacturer’s manual in order to know the proper tension for different size machines. Some people believe in keeping the track tension tight because it would last longer. However this is not necessary and it is It is important to consider the manufacturer’s manual in order to know the proper tension for different size machines. However this is not necessary and it is important to keep some flex. Also lose tracks can get damaged and may cause damage to the vehicle as well.

Do your best to find rubber tracks available in Melbourne made of the best quality.

Read More »

How to drive well: tips to improve driving

One of the main aspects, if you want to put into practice a less expensive driving, concerns the dosage of braking. While driving, when traveling a stretch of road at a constant pace, the weight of the vehicle is perfectly balanced between the front and rear, a situation that minimizes fuel consumption. Obviously, in order to reduce fuel consumption, an adequate number of revolutions must also be maintained, between 1,800 and 2,800 revolutions per minute.

This allows the engine to be used in optimal conditions, as the car needs a limited amount of fuel to propel it forward. However, when you intervene on the brakes, the weight distribution of the machine changes, causing the center of gravity to move forward or backward. By loading the front or rear, it is necessary to use all the engine power to control the car by counteracting the natural tendency of the vehicle to follow the point with the greatest grip.

Thanks to a correct driving style. To do this, just consider the curves in advance, avoiding entering at too high a speed, simply releasing the accelerator to reach a suitable pace, making the curve safely without aggressive braking. avoiding sudden and sudden accelerations, waiting for all four tires to have reached full grip on the road again, before opening the throttle again.

It must be considered that cars, every time you brake, consume a lot of energy to slow down the vehicle, so it is useful to maintain a correct safety distance, limiting the occasions when you have to intervene vigorously on the brakes.

In addition, a more sedate driving style must be maintained, especially in the city, trying to dose the accelerator and brake gently, a behavior that can save up to 10% on petrol consumption, a considerable sum if we estimate an average distance of 20,000 km. the year.

Read More »

DO NOT CREATE DANGER or TRAFFICKING

In Italy (as in 90% of the countries of the world) people drive on the right. But driving on the right can mean everything and nothing; the problem is to understand how far to the right you need to be. The fundamental rule is, also in this case, DO NOT CREATE DANGER or TRAFFICKING to others. We therefore make a distinction between driving as close as possible to the white margin strip, so stick to the roadside, and driving on the right without having this obligation.

In all other cases, the code recommends staying in the rightmost lane without particular restrictions. We point out that this rule was valid (even if it was expressed in a rather confusing way) and it is valid on the motorway and in general on all multi-lane roads, where we are obliged to ALWAYS stay on the right, even if we drive a car at 130 km / h . With the new highway code in particular, reference is made to this situation: whoever drives on the second lane, with the first free, is punishable by a cash fine and by the deduction of 4 points from the driving license (Article 143 CDS).

However, there are cases in which it is inadvisable if not forbidden to stay all right and these are in particular:

  1. in the presence of the “soft bank” warning sign, ie problems on the right side of the road;
  2. in the event of an icy road, where it is dangerous to stay too close to the edge because in the event of a skid you can easily get off the road
  3. in case of snow e
  4. in case of strong wind for the same reason;
  5. in case of a left turn, in which case we are obliged to stay as far to the left as possible; if we are on a one-way street, therefore, we must move to the left edge of the road, if instead we are on a two-way street, we must take you as close as possible to the white line.

From these rules follow those concerning the turning point; we distinguish the right turn from the left one. The right turn must be made, clearly after having signaled the maneuver and having respected all the precedence rules, staying as close as possible to the right edge of the road; the left turn, on the other hand, is a little more complex: it is necessary to start from the point furthest to the left possible, pass near the center of the road, leaving it to our right (we pass in front of it in practice) without cutting the road to those coming from the road in which we are entering. In some situations, given the complexity of the maneuver, reference can be made to the specific horizontal signs: just follow the white dotted stripes with the left wheels. Precisely because of the difficulty of the maneuver, roundabout intersections are being created much more often in which the rules are similar except for the fact of going around the center of the obstacle rather than passing it; in parentheses it has been shown that roundabouts are inherently less dangerous than classic intersections as they offer “only” 8 meeting points between vehicles compared to 24 at similar intersections.

Read More »